151
Appendix C: Connecting Additional External Monitors
5 Under View Setup, select Enable. This lets you select and arrange the channels you want to
show on the screen.
NOTE: Enabling View Setup disabl
es your ability to change channels the normal way on the
selected monitor. You will need to disable View Setup to return to normal operation.
Select Enable
6 Under View Mode, select the desired viewing mode: Single, Quad, Nine, or Sixteen.
7 Click Vout Setup. A menu appears that allows you to select the arrangement of channels.
8 Click the drop-do
wn menus to select which channels to show on the screen and the
arrangement of channels.
Select the arrangement of channels on screen
9 Click Apply to save changes. Click Ok. Right-click repeatedly to and return to live viewing.
10 Press 0
on the remote control 3 times to restore the system interface to the VGA/HDMI
monitor.
To Next Page
Loading...
Need help?
General
