TS-MAX
TS-MAX SPEED OFFSET: The “Takeaway Conveyor
Speed” parameter allows you to control the speed of the
Takeaway Conveyor. (Illustration 79) The speed of the
Takeaway Conveyor is controlled in millimeters or inches
per second.
If you want to group the product on the Takeaway
Conveyor closer together, decrease the setting to slow
the conveyor down. (Illustration 80)
If you want to increase the spacing between the product,
increase the setting to speed up the conveyor.
(Illustration 81)
7-34 031914
ILLUSTRATION 79
TS-MAX SPEED OFFSET
DRAFT SPACING
TRANSFER SYSTEM CLASSIFIER
ILLUSTRATION 81
TRANSFER SYSTEM CLASSIFIER
TIGHT DRAFT SPACING
ILLUSTRATION 80
To Next Page