8-20 031914
CLEANING INSTRUCTIONS
DAILY PROCEDURE
The following steps should be performed daily.
This procedure must follow the “Disassembly” of the
machine. Make sure the Touchscreen has been
covered by a plastic bag. (Illustration 58) Wear any
protective clothing, including eye protection that is
required in your plant for cleanup operations.
IMPORTANT!
Do not use high pressure water or high pressure
cleaning systems.
Normal pressure and foam cleaning systems are
recommended. The temperature of the rinse water
should be about 60°C (140°F) to melt down the
animal fats on the machine.
If the Knife is on the machine, make sure that the
Knife guard/carrier is installed. (Illustration 59)
ILLUSTRATION 59
KNIFE GUARD
CARRIER
ILLUSTRATION 58
PLASTIC BAG
To Next Page
Loading...