The purpose of this manual is to acquaint the owner of the
PowerMax3000
TM
Slicer with the basic information necessary to assemble,
operate, disassemble, clean and maintain the machine. The contents of
this book, when used with good judgment, should enable the operator and
mechanic to solve most normally occurring problems.
This manual deals with a typical machine. No attempt has been made to
describe every possible configuration that the machine may take or to
outline every procedure that may ever be performed. Each user may find it
necessary to develop ways of using the PowerMax3000
TM
Slicer to suit
unique circumstances or product.
The Formax Service, Engineering, and Training Departments are available
to help with any questions about suitability of any procedure.
IMPORTANT!
Read and understand the entire procedure before doing any repair or
setup operation.
CUSTOMER SERVICE - FORMAX, INC.
U.S.A. Main Office
9150 191st Street
Mokena, IL 60448-0330
Phone: (708) 479-3500
Fax: (708) 479-3599
e-mail: forming_service@formaxinc.com
TRAINING DEPARTMENT-U.S.A.
9150 191st Street
Mokena, IL 60448-0330
Phone: (708) 479-3588
Fax: (708) 479-3598
e-mail: usatraining@formaxinc.com
AFTER HOURS SERVICE-U.S.A.
(815) 485-4400
EUROPE Main Office
Schipholweg 315
1171 PL Badhoevedorp
The Netherlands
Phone: +31-20-659.08.00
Fax: +31-20-659.08.01
e-mail: service_europe@formaxinc.com
TRAINING DEPARTMENT-EUROPE
Schipholweg 315
1171 PL Badhoevedorp
The Netherlands
Phone: +31-20-659.08.00
Fax: +31-20-659.08.01
e-mail: service_europe@formaxinc.com
AFTER HOURS SERVICE-EUROPE
+31-20-659.08.00
INTRODUCTION
To Next Page
Loading...