SHS-8 031914
STEP 9 REMOVE THE KNIFE
1. Press the “MASTER OFF” button and
open the door.
2. Retract the deburr stone by pushing
and turning the knob until it remains
retracted.
3. Pull the hone assembly back towards
you and engage the locking pin.
(Illustration 18)
ACAUTION!
The hone stone must be retracted to
avoid damaging the cutting edge.
4. Raise the honing mechanism and
latch it at the top. (Illustration 19)
LATCH
HONING
MECHANISM
ILLUSTRATION 19
LOCKING PIN
HONE
STONE
ILLUSTRATION 18
To Next Page