TS-MAX
TS MAX SPEED OFFSET: The “TS Max Speed
Offset” adjustment controls the speed of the
product transferring to the packager.
(Illustration 90) The TS Max Speed Offset is
adjusted as a percentage of the Classifier speed.
This setting can be use to control the spacing
between the product going to the packager.
Setting this adjustment to “0%,” will transfer the
product at the same rate of speed as the
Classifier.
If you prefer more spacing between the stacks or
drafts, increase the setting. (Illustration 91)
If you prefer the stacks or drafts grouped together,
decrease the setting. (Illustration 92)
6-34 031914
ILLUSTRATION 90
“TS MAX SPEED OFFSET” ADJUSTMENT
DRAFT SPACING
TRANSFER SYSTEM CLASSIFIER
ILLUSTRATION 91
TRANSFER SYSTEM CLASSIFIER
TIGHT DRAFT SPACING
ILLUSTRATION 92
To Next Page
Loading...