Fujitsu ETERNUS CS800 S5 - Page 108

Cabling within the ETERNUS CS800 S5 System Installing the ETERNUS CS800 S5 Modules
94 U41840-J-Z125-7-76
The CE... and DE... labels are already fixed on the storage modules in the factory. Hence
these labels are missing on the label sheet.
For a Scale system, “CE“ denotes the storage base and “DE-1“, “DE-2“, ... the sequence of
storage expansion modules.
For an explanation of the labels also see Figure 52.
Figure 52: Locations on the ETERNUS CS800 S5 Denoted by Labels
The other identifiers on the label sheet have corresponding meanings.
Take the relevant labels from the label sheet and affix them to the ends of the corresponding
cables before connecting the cables.
P1
P0 P1
MNT
P0 P1
MNT
Slot1
Slot2
Slot3
Slot4 Slot5
Slot6
Service
port
Onboard
LAN 2
P1
P2
P1
CM1CM0