U41840-J-Z125-7-76 219
Figure 138: Media Move Page
To move a virtual tape cartridge:
1. In the Partition drop-down box, select the partition that contains the cartridge to move.
2. If the partition is online, click Offline to take the partition offline. To move media, the
partition must be offline.
3. In the Source Location drop-down box, select the type of location you want to move a
cartridge from (Drive, Storage Slot, I/E Slot).
4. (Optional) If you are moving a cartridge from a drive, select the Force Unload (Virtual
Tape Drives) check box to force the drive to unload the cartridge before ejecting it.
5. (Optional) To reduce the number of cartridges displayed in the table, enter a barcode or
barcode range in the Barcode Filter box and click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to indicate a wildcard.
Separate multiple entries with commas, and do not use spaces.
For example, enter AAA* to display all cartridge barcodes beginning with AAA. Or enter
AAA010-AAA020 to display all barcodes in the specified range. Click the Quick Tip
icon [?] for additional examples.
6. Select the cartridge to move from the source location.
To Next Page
Loading...
