262 U41840-J-Z125-7-76
Adding a Remote User
Add a remote user to create OST user credentials for use with OST AIR. When you enable
Automatic Image Replication for an LSU, you specify a remote user. The remote user
credentials on the source ETERNUS CS800 must match the local user credentials on the
target (remote) ETERNUS CS800.
To add a remote user:
1. Click Add.
The Add Remote AIR Credential window displays (see Figure 162).
Figure 162: Add Remote AIR Credential
2. Enter information about the remote user:
● User name - Enter the name of the remote user.
● New Password - Enter the password for the remote user.
● Confirm New Password - Enter the password again to confirm it.
● Description - (Optional) Enter a brief description of the remote user.
3. Click Apply.
Editing a Remote User
Edit a remote user to change the user's password or description.
To edit a remote user:
1. Select the user and click Edit.
The Edit Remote Credentials window displays (see Figure 163).
To Next Page
Loading...
