264 U41840-J-Z125-7-76
optionally use the replication channel.) When a data IP address is mapped to a replication
IP address, OST traffic that is sent to one of the IP addresses is routed to the other IP
address as necessary.
I
Fujitsu does not recommend mapping multiple data IP addresses to a single
replication IP address. If you have mapped multiple data IP addresses and the
routing is not working, try removing the additional data IP addresses, and map only
a single data IP address.
To access the Target IP Mapping page, on the OST page, click the Target IP Mapping tab
(see Figure 164).
Figure 164: Target IP Mapping Page
Use the Target IP Mapping page to perform the following tasks:
● View information about mapped data and replication IP addresses (see "Target IP
Mapping List" on page 265).
● Map a target data IP address to a replication IP address (see "Mapping a Target IP
Address" on page 265).
● Edit the mapping for a target data IP address (see "Editing a Mapped IP Address" on
page 266).
To Next Page
Loading...
