U41840-J-Z125-7-76 379
To access the Failback Jobs page, on the Receive VTL page, click the Failback Jobs tab
(see Figure 229).
Figure 229: Failback Jobs Page
The Snapshot Failback Jobs section displays the following information about failback
jobs:
● Partition Name - The name of the partition the snapshot was created from.
● Destination System - The hostname of the system that the snapshot was sent to.
● Started - The time the failback job was started.
● Finished - The time the failback job finished.
● Status - The status of the failback job (Success, In Progress, or Failed).
Use the Failback Jobs page to perform the following tasks:
● To delete information for a failback job, select it in the Snapshot Failback Jobs section
and click Delete Job Info.
● To abort a failback job that is in progress, select it in the Snapshot Failback Jobs
section and click Abort.
To Next Page
Loading...
