ETERNUS CS800 S4/S5 Hardware Removal and Replacement Procedures for CRUs
512 U41840-J-Z125-7-76
Figure 299: Inserting the 2.5-inch HDD
Removing the non-defective HDD Modules
V
CAUTION!
If you need to remove non-defective HDD modules, consider the following:
● Do never remove a non-defective HDD module during operation of the
ETERNUS CS800.
● All HDD modules (drives) must be uniquely identified so that they can be
reinstalled in their original mounting locations later. If this is not done, existing
data can be lost.
To Next Page
Loading...
