Fujitsu fi-8170

Icon Connection Status via a USB
Cable
Connection Status via a LAN
Cable (*1)
Network Function Setting
(*2)
Not connected Not connected Enable
None Not connected Connected Disable
Not connected Not connected Disable
*1:If no communication takes place even if the LAN cable is connected, it is regarded as "Not connected".
*2:When the network function is disabled, the wired LAN status does not appear.
For information on how to configure the network settings, refer to Settings to Use the Scanner Only via
the USB Connection [Network Function] [fi-8190/fi-8290/fi-8170/fi-8270/fi-8150/fi-8250] (page 393).
How to Use the Operator Panel [fi-8190/fi-8290/fi-8170/fi-8270]
145