Fujitsu PRIMERGY RX4770 M5 User Manual

Installing the new expansion card
▶
If applicable, install the slot bracket, see "Installing a slot bracket" on
page 172.
▶
Install the expansion card, see "Installing the expansion card" on page
192.
Concluding steps
▶
For slot 3, 4, 5, 6 and 7: Install the corresponding riser module, see
"Handling riser modules" on page 60.
▶
"Reassembling" on page 53.
▶
If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord (AC PSU)" on page 58.
▶
"Switching on the server" on page 59.
▶
"Enabling replaced components in the BIOS" on page 102.
▶
Inform the customer about changed WWN, MAC and SAS addresses, see
"Basic information" on page 110.
▶
"Updating the NIC configuration file in a Linux and VMware environment" on
page 107.
▶
"Updating expansion card firmware" on page 93.
▶
If applicable, "Enabling the boot watchdog" on page 101.
▶
"Resuming BitLocker functionality" on page 108.
▶
If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
Configuration of network settings should be performed by the
customer
. For more information, see "Note on network settings
recovery" on page 211.
▶
If applicable, restore LAN teaming configurations, see "After replacing or
upgrading LAN controllers" on page
117.
Expansion cards and backup units
212 Upgrade and Maintenance Manual RX4770 M5

Fujitsu PRIMERGY RX4770 M5 Specifications

General

Brand	Fujitsu
Model	PRIMERGY RX4770 M5
Category	Server
Language	English