150
Item Descri
tion
HTTPS
Enable HTTPS
service.
Specifies whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Port Number.
Sets the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL.
Associates the HTTPS service with an ACL. Only the clients that pass the
ACL filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
Certificate.
Sets the local certificate for the HTTPS service. The list displays certificate
subjects.
You can configure the available PKI domains by selecting Authentication >
Certificate Management from the navigation tree at the left side of the
interface. For more information, see "Certificate management."
To Next Page
Loading...
