H3C WA Series User Manual

336
Figure 362 Enable the wireless service
5. Enable 802.11n(2.4GHz) radio (By default, 802.11n(2.4GHz) radio is enabled.)
Select Radio > Radio from the navigation tree to enter the Radio page. Make sure
802.11n(2.4GHz) is enabled.
Figure 363 Enable 802.11n(2.4GHz) radio
Verifying the configuration
• The client can successfully associate with the AP and access the WLAN network.
• You can view the online clients on the page you enter by selecting Summary > Client from the
navigation tree.
Figure 364 View online clients
0014-6c8a-43ff is an 802.11g client, and 001e-c144-473a is an 802.11n client. In this example, client
types are not restricted. Therefore, both 802.11g and 802.11n clients can access the wireless network. If
Client 802.11n Only is configured, only 001e-c144-473a can access the wireless network.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English