338
Figure 366 WDS setup page
b. Click the corresponding icon of the target radio unit.
c. On the page that appears, select the Pass Phrase box, and enter 12345678 in the Preshared
Key field, leave the neighbor MAC address box blank (indicating that the AP can establish a
WDS link with any other AP), and click Apply.
Figure 367 WDS setup page
3. Configure the working channel.
a. Select Radio > Radio from the navigation tree.
b. Click the corresponding icon of the target radio unit to enter the Radio page.
c. Select the channel to be used from the Channel list.
d. Click Apply.
To Next Page
Loading...
