H3C WA Series User Manual

382
Figure 406 Adding an advanced IPv4 ACL
3. Define an ACL rule for traffic to the FTP server:
a. Click the Advanced Setup tab.
b. Select 3000 in the ACL list. Select the Rule ID option, and enter rule ID 2. Select Permit in the
Action list.
c. Select the Destination IP Address option, and enter IP address 10.1.1.1 and destination
wildcard 0.0.0.0.
d. Select test-time in the Time Range list.
e. Click Add.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English