Honeywell Fusion4 MSC-L User Manual

Operation - Stream Configuration
Part No.: 4418309_Rev09 Fusion4 MSC-L
Honeywell Installation & Operation Manual 5 - 169
5.14.1.5.0.6 Blend Tolerance
On the Stream Config . Stream n . Alarms screen, select <Blend
Tolerance>.
The Stream Config. . Stream n . Blend Tolerance screen is displayed
with the following entities.
5.14.1.5.0.7 Preset overrun
On the Stream Config . Stream n . Alarms screen, select <Preset
overrun>.
The Stream Config. . Stream n . Preset overrun screen is displayed
with the following entities.
[Feedback timeout]
With this entity you can set the time in
seconds in which the product stream
block valve must give feedback to the
MSCL. If no feedback is received in
[feedback timeout] an alarm occurs
depending on
[Alarm action].
<1> s ... <255> s
(default = <15> s)
Entity Description Value range
[Alarm action]
With this entity you can configure the
alarm behavior, in case this particular
alarm occurs.
<Disabled> (default)
<Display>
<Display shutdown>
<Display pause>
[Tolerance limit]
With this entity you can configure the
blend tolerance percentage that the
MSC-L raises.
•
blend tolerance low alarm if the
blend ratio between delivered
product quantity with delivered batch
quantity is less than
[blend tolerance
limit].
• blend tolerance high alarm if the
blend ratio between delivered
product quantity with delivered batch
quantity is greater than
[blend
tolerance limit].
<0> % ... <10> %
(default = <5> %)
Entity Description Value range
[Alarm action]
With this entity you can configure the
alarm behavior, in case this particular
alarm occurs.
<Disabled>
<Display>
<Display shutdown>
<Display pause>
(default)
Entity Description Value range

Honeywell Fusion4 MSC-L Specifications

General

Brand	Honeywell
Model	Fusion4 MSC-L
Category	Desktop
Language	English