HP 6125G - Dscp (OSPF View); Enable Link-Local-Signaling

89
dscp (OSPF view)
Syntax
dscp dscp-value
undo dscp
View
OSPF view
Default level
2: System level
Parameters
dscp-value: Sets the Differentiated Services Code Point (DSCP) value for OSPF packets, in the range
of 0 to 63.
Description
Use dscp to set the DSCP value for OSPF packets.
Use undo dscp to restore the default.
By default, the DSCP value in OSPF packets is 48.
Examples
# Set the DSCP value for OSPF packets of OSPF process 1 to 63.
<Sysname> system-view
[Sysname] ospf
[Sysname-ospf-1] dscp 63
enable link-local-signaling
Syntax
enable link-local-signaling
undo enable link-local-signaling
View
OSPF view
Default level
2: System level
Parameters
None
Description
Use enable link-local-signaling to enable the OSPF link-local signaling (LLC) capability.
Use undo enable link-local-signaling to disable the OSPF link-local signaling capability.
By default, this capability is disabled.
Examples
# Enable link-local signaling for OSPF process 1.