HELLO: Extern option mismatch Hello packets with mismatched option field
HELLO: Neighbor unknown Hello packets received from unknown neighbors
DD: MTU option mismatch DD packets with mismatched MTU
DD: Unknown LSA type DD packets with unknown LSA type
DD: Extern option mismatch DD packets with mismatched option field
LS ACK: Bad ack Bad LSAck packets for LSU packets
LS ACK: Unknown LSA type LSAck packets with unknown LSA type
LS REQ: Empty request LSR packets with no request information
LS REQ: Bad request Bad LSR packets
LS UPD: LSA checksum bad LSU packets with wrong LSA checksum
LS UPD: Received less recent LSA LSU packets without latest LSA
LS UPD: Unknown LSA type LSU packets with unknown LSA type
display ospf interface
Syntax
display ospf [ process-id ] interface [ interface-type interface-number | all ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
all: Displays the OSPF information of all interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf interface to display OSPF interface information.
If no OSPF process is specified, the OSPF interface information of all OSPF processes is displayed.
To Next Page
Loading...
Need help?
General