Ceiling Value Upper limit of penalty value
Reuse Value Reuse Value
Reach HalfLife Time(in second) Half-life time of active routes
Unreach HalfLife Time(in second) Half-life time of inactive routes
Suppress-Limit Suppress value
display bgp ipv6 routing-table different-origin-as
Syntax
display bgp ipv6 routing-table different-origin-as [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table different-origin-as to display IPv6 BGP routes originating from
different autonomous systems.
Examples
# Display routes from different ASs.
<Sysname> display bgp ipv6 routing-table different-origin-as
BGP Local router ID is 2.2.2.2
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 222:: PrefixLen : 64
NextHop : 122::2 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: 100 ?
For description of the fields, see Table 73.
To Next Page
Loading...
Need help?
General