24
Static routing configuration commands
The term "router" in this chapter refers to both routers and Layer 3 switches.
delete static-routes all
Syntax
delete [ vpn-instance vpn-instance-name ] static-routes all
View
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a case-sensitive string
of 1 to 31 characters. If no VPN is specified, all static routes on the public network are deleted.
Description
Use delete static-routes all to delete all static routes.
When you use this command to delete static routes, the system will prompt you to confirm the operation
before deleting all the static routes.
Related commands: display ip routing-table and ip route-static.
Examples
# Delete all static routes on the router.
<Sysname> system-view
[Sysname] delete static-routes all
This will erase all ipv4 static routes and their configurations, you must reconfigure all
static routes
Are you sure?[Y/N]:Y
ip route-static
Syntax
ip route-static dest-address { mask | mask-length } { next-hop-address [ bfd control-packet [ bfd-source
ip-address ] | track track-entry-number ] | interface-type interface-number [ next-hop-address ] [ bfd
{ control-packet [ bfd-source ip-address ] | echo-packet } ] | vpn-instance d-vpn-instance-name
next-hop-address [ track track-entry-number ] } [ preference preference-value ] [ tag tag-value ]
[ permanent ] [ description description-text ]
undo ip route-static dest-address { mask | mask-length } [ next-hop-address | interface-type
interface-number [ next-hop-address ] | vpn-instance d-vpn-instance-name next-hop-address ]
[ preference preference-value ]
ip route-static vpn-instance s-vpn-instance-name&<1-6> dest-address { ma
sk | mask-length }
{ next-hop-address [ public ] [ bfd control-packet [ bfd-source ip-address ] | track track-entry-number ] |
To Next Page
Loading...
Need help?
General