249
Examples
# Display outbound/inbound OSPFv3 packet statistics on associated interfaces.
<Sysname> display ospfv3 statistics
OSPFv3 Statistics
Interface Vlan-interface11 Instance 0
Type Input Output
Hello 189 63
DB Description 10 8
Ls Req 2 1
Ls Upd 16 6
Ls Ack 10 6
Discarded 0 0
Table 62 Command output
Field Descri
Interface Interface name
Instance Instance number
Type Type of packet
Input Number of packets received by the interface
Output Number of packets sent by the interface
Hello Hello packet
DB Description Database description packet
Ls Req Link state request packet
Ls Upd Link state update packet
Ls Ack Link state acknowledgement packet
Discarded Number of discarded packets
display ospfv3 topology
Syntax
display ospfv3 [ process-id ] topology [ area area-id ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Displays the topology information of an OSPFv3 process; The process ID ranges from 1 to
65535.
area: Displays the topology information of the specified area.
To Next Page
Loading...
Need help?
General