HP 6125G - Display Ripng Database

210
Default Cost : 0
Maximum number of balanced paths : 8
Update time : 30 sec(s) Timeout time : 180 sec(s)
Suppress time : 120 sec(s) Garbage-Collect time : 120 sec(s)
Number of periodic updates sent : 0
Number of trigger updates sent : 0
Table 40 Command output
Field Descri
p
tion
RIPng process RIPng process ID.
Preference RIPng preference.
Checkzero
Indicates whether zero field check for RIPng packet
headers is enabled.
Default Cost Default metric of redistributed routes.
Maximum number of balanced paths Maximum number of load balanced routes.
Update time RIPng update interval, in seconds.
Timeout time RIPng timeout interval, in seconds.
Suppress time RIPng suppress interval, in seconds.
Garbage-Collect time RIPng garbage collection interval, in seconds.
Number of periodic updates sent Number of periodic updates sent.
Number of trigger updates sent Number of triggered updates sent.
display ripng database
Syntax
display ripng process-id database [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIPng process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.