247
display ospfv3 routing
Syntax
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length | ipv6-address/prefix-length |
abr-routes | asbr-routes | all | statistics ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length, in the range of 0 to 128.
abr-routes: Displays routes to ABR.
asbr-routes: Displays routes to ASBR.
all: Displays all routes.
statistics: Displays the OSPFv3 routing table statistics .
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 routing to display OSPFv3 routing table information.
Examples
# Display OSPFv3 routing table information.
<Sysname> display ospfv3 routing
E1 - Type 1 external route, IA - Inter area route, I - Intra area route
E2 - Type 2 external route, * - Selected route
OSPFv3 Router with ID (1.1.1.1) (Process 1)
------------------------------------------------------------------------
*Destination: 2001::/64
Type : I Cost : 1
NextHop : directly-connected Interface: Vlan11
To Next Page
Loading...
