372
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp vpnv4 vpn-instance routing-table to display the BGP VPNv4 routing information for a
specific VPN instance.
Examples
# Display the BGP VPNv4 routing information of VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 routing-table
Total Number of Routes: 5
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*>i 10.0.0.0 1.1.1.1 0 100 0 i
*> 10.1.1.0/24 0.0.0.0 0 0 ?
*> 20.0.0.0 10.1.1.1 0 99 200?
*>i 123.1.1.1/32 1.1.1.1 0 100 0 ?
*> 124.1.1.1/32 0.0.0.0 0 0 ?
Table 87 Command output
Field Descri
Total Number of Routes Total number of routes
BGP Local router ID Router ID of the local BGP router
Status codes Route status code. For valid values.
Origin Route origin code. For valid values.
Network Network address in the BGP routing table
NextHop Address of the next hop
MED Metric associated with the destination network
LocPrf Local preference
PrefVal Preferred value of the protocol
Path/Ogn AS_PATH attribute/Route origin code.
display fib vpn-instance
Syntax
display fib vpn-instance vpn-instance-name [ acl acl-number | ip-prefix ip-prefix-name ] [ | { begin |
exclude | include } regular-expression ]
To Next Page
Loading...
Need help?
General