HP 6125G - Peer Capability-Advertise Suppress-4-Byte-As (Ipv6 Address Family View)

309
Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use peer capability-advertise route-refresh to enable IPv6 BGP route-refresh.
Use undo peer capability-advertise route-refresh to disable the function.
By default, route-refresh is enabled.
Examples
# Disable route-refresh of peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] undo peer 1:2::3:4 capability-advertise route-refresh
peer capability-advertise suppress-4-byte-as (IPv6 address
family view)
Syntax
peer { group-name | ipv6-address } capability-advertise suppress-4-byte-as
undo peer { group-name | ipv6-address } capability-advertise suppress-4-byte-as
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use peer capability-advertise suppress-4-byte-as to enable 4-byte AS number suppression.
Use undo peer capability-advertise suppress-4-byte-as to disable the function.
By default, the 4-byte AS number suppression function is disabled.
The device supports 4-byte AS numbers and uses 4-byte AS numbers by default. If the peer devices
support only 2-byte AS numbers, you must enable the 4-byte AS number suppression function on the
device.
If the peer device supports 4-byte AS numbers, do not enable the suppression function; otherwise, the
BGP peer relationship cannot be established.
Examples
# In IPv6 address family view, enable 4-byte AS number suppression for peer 2001::1.