Peer Preferred Value Preferred value of the routes from the peer.
Routing policy configured A routing policy is configured.
No routing policy is configured No routing policy is configured.
Members Group members.
Peer IPv6 address of the peer.
AS AS number.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages to be sent.
PrefRcv Number of prefixes received.
Up/Down
The lasting time of a session/the lasting time of present state
(when no session is established).
State State machine state of peer.
display bgp ipv6 network
Syntax
display bgp ipv6 network [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 network to display IPv6 routes advertised with the network command.
Examples
# Display IPv6 routes advertised with the network command.
<Sysname> display bgp ipv6 network
BGP Local Router ID is 1.1.1.2.
Local AS Number is 200.
Network Prefix Route-policy Short-cut
To Next Page
Loading...
Need help?
General