192
undo peer { group-name | ip-address } route-limit
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
prefix-number: Number of prefixes that can be received from the peer or peer group. Its range varies with
devices. If the number of prefixes received from the peer/peer group reaches the prefix-number, the
router will tear down the connection to the peer/peer group.
alert-only: If the number of prefixes received from the peer/peer group reaches the prefix-number, the
router will not tear down the connection to the peer/peer group but display an alarm message.
reconnect reconnect-time: Specifies a reconnect time, after which, the router will re-establish a
connection to the peer/peer group. It has no default value and is in the range of 1 to 65535 seconds.
percentage-value: Threshold value for the router to display an alarm message (the router displays an
alarm message when the ratio of the number of received prefixes to the prefix-number exceeds the
percentage). It is in the range of 1 to 100 and defaults to 75.
Description
Use peer route-limit to set the number of route prefixes that can be received from a peer/peer group.
Use undo peer route-limit to restore the default.
The number is not limited by default.
Examples
# In BGP view, set the number of route prefixes that can be received from peer 129.140.6.6 to 10000.
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] peer 129.140.6.6 as-number 110
[Sysname-bgp] peer 129.140.6.6 route-limit 10000
# In BGP-VPN instance view, set the number of route prefixes that can be received from peer 129.140.6.6
to 10000. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer 129.140.6.6 as-number 110
[Sysname-bgp-ipv4-vpn1] peer 129.140.6.6 route-limit 10000
peer route-policy (BGP/BGP-VPN instance view)
Syntax
peer { group-name | ip-address } route-policy route-policy-name { export | import }
undo peer { group-name | ip-address } route-policy route-policy-name { export | import }
To Next Page
Loading...
