359
This command cannot set a next hop for redistributed routes.
Examples
# Configure node 10 of routing policy policy1 to configure next hop 3ffe:506::1 for IPv6 routing
information matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply ipv6 next-hop 3ffe:506::1
display ip ipv6-prefix
Syntax
display ip ipv6-prefix [ ipv6-prefix-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ip ipv6-prefix to display the statistics of the specified IPv6 prefix list. If no IPv6 prefix list is
specified, the statistics of all IPv6 prefix lists will be displayed.
Examples
# Display the statistics of all IPv6 prefix lists.
<Sysname> display ip ipv6-prefix
Prefix-list6 abc
Permitted 0
Denied 0
index: 10 permit ::/0
index: 20 permit ::/1 ge 1 le 128
Table 81 Command output
Field Description
Prefix-list6 Name of the IPv6 prefix list
Permitted Number of routes satisfying the match criterion
To Next Page
Loading...
Need help?
General