157
View
Any view
Default level
1: Monitor level
Parameters
as-regular-expression: AS path regular expression, a string of 1 to 80 characters.
Description
Use display bgp routing-table regular-expression to display BGP routing information matching the
specified AS path regular expression.
Examples
# Display BGP routing information with AS number ended with 300.
<Sysname> display bgp routing-table regular-expression 300$
BGP Local router ID is 20.20.20.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 30.30.30.1 0 0 300i
For description of the fields, see Table 36.
display bgp routing-table statistic
Syntax
display bgp routing-table statistic [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp routing-table statistic to display BGP routing statistics.
To Next Page
Loading...
Need help?
General