LSAs originated by this router LSAs originated by this router
Router Number of Type-1 LSAs originated
Network Number of Type-2 LSAs originated
Sum-Net Number of Type-3 LSAs originated
Sum-Asbr Number of Type-4 LSAs originated
External Number of Type-5 LSAs originated
NSSA Number of Type-7 LSAs originated
Opq-Link Number of Type-9 LSAs originated
Opq-Area Number of Type-10 LSAs originated
Opq-As Number of Type-11 LSAs originated
LSA originated Number of LSAs originated
LSA Received Number of LSAs received
Routing Table Routing table information
Intra Area Intra-area route number
Inter Area Inter-area route number
ASE ASE route number
display ospf error
Syntax
display ospf [ process-id ] error [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf error to display OSPF error information.
If no process is specified, the OSPF error information of all OSPF processes is displayed.
To Next Page
Loading...
Need help?
General