HP 6125G - Reset Bgp Ipv4 All; Router ID

201
Description
Use reset bgp flap-info to clear the flap statistics of routes matching the specified filter.
Examples
# Clear the flap statistics of all routes matching AS path list 10.
<Sysname> reset bgp flap-info as-path-acl 10
reset bgp ipv4 all
Syntax
reset bgp ipv4 all
View
User view
Default level
2: System level
Parameters
None
Description
Use reset bgp ipv4 all to reset all the BGP connections of IPv4 unicast address family.
Examples
# Reset all the BGP connections of IPv4 unicast address family.
<Sysname> reset bgp ipv4 all
router id
Syntax
router id router-id
undo router id
View
System view
Default level
2: System level
Parameters
router-id: Router ID, in the form of a dotted decimal IPv4 address.
Description
Use router id to configure a global router ID.
Use undo router id to remove the global router ID.
By default, no global router ID is configured.
Some routing protocols use a router ID to identify a device. You can configure a global router ID, which
is used by routing protocols that have no router ID configured.