HP 6125G - Display Ripng Interface

211
Description
Use display ripng database to display all active routes in the advertising database of the specified RIPng
process, which are sent in normal RIPng update messages.
Examples
# Display the active routes in the database of RIPng process 100.
<Sysname> display ripng 100 database
2001:7B::2:2A1:5DE/64,
cost 4, Imported
1:13::/120,
cost 4, Imported
1:32::/120,
cost 4, Imported
1:33::/120,
cost 4, Imported
100::/32,
via FE80::200:5EFF:FE04:3302, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2
3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2
4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2
4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2
1111::/64,
cost 0, RIPng-interface
Table 41 Command output
Field Descri
p
tion
2001:7B::2:2A1:5DE/64 IPv6 destination address/prefix length
via Next hop IPv6 address
cost Route metric value
Imported Route redistributed from another routing protocol
RIPng-interface Route learned from the interface
display ripng interface
Syntax
display ripng process-id interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]