163
graceful-restart timer wait-for-rib
Syntax
graceful-restart timer wait-for-rib timer
undo graceful-restart timer wait-for-rib
View
BGP view
Default level
2: System level
Parameters
timer: Time to wait for the End-of-RIB marker, in the range of 3 to 300 seconds.
Description
Use graceful-restart timer wait-for-rib to configure the time to wait for the End-of-RIB marker.
Use undo graceful-restart timer wait-for-rib to restore the default.
By default, the time to wait for the End-of-RIB marker is 180 seconds.
After a BGP session has been successfully (re)established, the End-of-RIB marker must be received within
the time specified with this command.
Using this command can speed up route convergence.
Before configuring this command, you must enable the BGP Graceful Restart capability.
Related commands: graceful-restart.
Examples
# Set the time to wait for the End-of-RIB marker to 100 seconds.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] graceful-restart timer wait-for-rib 100
group (BGP/BGP-VPN instance view)
Syntax
group group-name [ external | internal ]
undo group group-name
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
external: Creates an EBGP peer group, which can be the group of another sub AS in a confederation.
internal: Creates an IBGP peer group.
To Next Page
Loading...
Need help?
General