HP 6125G - Display Bgp Ipv6 Routing-Table Community

290
BGP Local router ID is 30.30.30.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
*> Network : 30:30:: PrefixLen : 64
NextHop : 30:30::30:1 LocPrf :
PrefVal : 0 Label : NULL
MED : 0
Path/Ogn: i
For description of the fields, see Table 73.
display bgp ipv6 routing-table community
Syntax
display bgp ipv6 routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ] * [ whole-match ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
aa:nn: Community number; both aa and nn are in the range of 0 to 65535.
&<1-13>: Indicates the argument before it can be entered up to 13 times.
no-advertise: Displays IPv6 BGP routes that cannot be advertised to any peer.
no-export: Displays IPv6 BGP routes that cannot be advertised out the AS; if a confederation exists, it
displays IPv6 BGP routes that cannot be advertised out the confederation, but can be advertised to other
sub ASs in the confederation.
no-export-subconfed: Displays IPv6 BGP routes that cannot be advertised out the AS or to other sub ASs
if a confederation is configured.
whole-match: Displays the IPv6 BGP routes exactly matching the specified COMMUNITY attribute.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp ipv6 routing-table community to display the routing information with the specified
COMMUNITY attribute.