tion
Address Route destination address in local database, in dotted hexadecimal notation.
Hash Hash index.
Refcount Count of routes that used the path.
MED MED of the path.
Path AS_PATH attribute of the path, recording the ASs it has passed, for avoiding routing loops
Origin
ORIGIN attribute of the route, which can take on one of the following values:
• i—Indicates the route is interior to the AS. Summary routes and routes defined using the
network command are considered IGP routes.
• e—Indicates that a route is learned from the exterior gateway protocol (EGP).
• ?—Short for INCOMPLETE. It indicates that the origin of a route is unknown and the route
is learned by other means. BGP sets ORIGIN attribute of routes learned from other IGP
protocols to INCOMPLETE.
display bgp ipv6 peer
Syntax
display bgp ipv6 peer [ group-name log-info | ipv4-address verbose | ipv6-address { log-info |
verbose } | verbose ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: Specifies the IPv6 address of a peer to be displayed.
log-info: Displays log information of the specified peer.
verbose: Displays the detailed information of the peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
To Next Page
Loading...
Need help?
General