HP 6125G - Display Bgp Vpnv4 Vpn-Instance Paths

366
Description
Use display bgp vpnv4 vpn-instance network to display information about the BGP VPNv4 routes
injected into a specific VPN instance or all VPN instances.
Examples
# Display information about the BGP VPNv4 routes injected into the VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 network
BGP Local Router ID is 1.1.1.1.
Local AS Number is 100.
Network Mask Route-policy Short-cut
10.0.0.0 255.0.0.0
Table 83 Command output
Field Descri
p
tion
BGP Local Router ID Router ID of the local BGP router
Local AS Number Local AS number
Network Advertised network route
Mask Mask of the advertised network route
Route-policy Routing policy configured
Short-cut Whether this route is a short-cut route
display bgp vpnv4 vpn-instance paths
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name paths [ as-regular-expression | { | { begin | exclude
| include } regular-expression } ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the VPN
instance name, a case-sensitive string of 1 to 31 characters.
as-regular-expression: Regular expression for filtering the AS path information to be displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.