Type
Type of the route to the ABR or ASBR:
• Intra— intra-area route
• Inter—Inter-area route
Destination Router ID of an ABR/ASBR
Area ID of the area of the next hop
Cost Cost from the router to the ABR/ASBR
Nexthop Next hop address
RtType Router type: ABR, ASBR
display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address { mask | mask-length } ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
ip-address: IP address, in dotted decimal format.
mask: IP address mask, in dotted decimal format.
mask-length: Mask length, in the range of 0 to 32 bits.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf asbr-summary to display information about the redistributed routes that are
summarized.
If no OSPF process is specified, related information of all OSPF processes is displayed.
If no IP address is specified, information about all summarized redistributed routes will be displayed.
Related commands: asbr-summary.
To Next Page
Loading...
Need help?
General