155
display bgp routing-table label
Syntax
display bgp routing-table label [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp routing-table label to display labeled BGP routing information.
Examples
# Display labeled BGP routing information.
<Sysname> display bgp routing-table label
BGP Local router ID is 6.6.6.7
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total Number of Routes: 2
Network NextHop In/Out Label
*> 4.4.4.4/32 127.0.0.1 3/NULL
*> 5.5.5.5/32 1.1.1.1 NULL/1024
The In/Out Label field refers to the inbound/outbound label. For the description of other fields, see Table
36.
display bgp routing-table peer
Syntax
display bgp routing-table peer ip-address { advertised-routes | received-routes } [ network-address
[ mask | mask-length ] | statistic ] [ | { begin | exclude | include } regular-expression ]
View
Any view
To Next Page
Loading...
Need help?
General