CkSum Checksum
# Display the statistics of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list statistics
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Neighbor LSA-Count
Vlan11 10.1.1.1 0
Table 57 Command output
Field Descri
Interface Interface name
Neighbor Neighbor router ID
LSA-Count Number of LSAs in the request list
display ospfv3 retrans-list
Syntax
display ospfv3 [ process-id ] retrans-list [ { external | inter-prefix | inter-router | intra-prefix | link |
network | router | grace } [ link-state-id ] [ originate-router ip-address ] | statistics ] [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: OSPFv3 process ID, in the range of 1 to 65535.
external: Displays the AS-external LSA information of the OSPFv3 link state retransmission list.
inter-prefix: Displays the Inter-area-prefix LSA information of the OSPFv3 link state retransmission list.
inter-router: Displays the Inter-area-router LSA information of the OSPFv3 link state retransmission list.
intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state retransmission list.
link: Displays the Link LSA information of the OSPFv3 link state retransmission list.
network: Displays the Network-LSA information of the OSPFv3 link state retransmission list.
router: Displays the Router-LSA information of the OSPFv3 link state retransmission list.
grace: Displays the Grace-LSA information of the OSPFv3 link state retransmission list.
link-state-id: Link state ID, in the format of an IPv4 address.
originate-router ip-address: Specifies the router ID of an advertising router.
statistics: Displays the LSA statistics of the OSPFv3 link state retransmission list.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
To Next Page
Loading...
Need help?
General