To Next Page

To Previous Page

Examples

# Filter incoming routes using ACL 2000.

<Sysname> system-view

[Sysname] acl number 2000

[Sysname-acl-basic-2000] rule deny source 192.168.10.0 0.0.0.255

[Sysname-acl-basic-2000] quit

[Sysname] ospf 100

[Sysname-ospf-100] filter-policy 2000 import

# Configure ACL 3000 to permit only route 113.0.0.0/16 to pass, and reference ACL 3000 to filter

incoming routes.

<Sysname> system-view

[Sysname] acl number 3000

[Sysname-acl-adv-3000] rule 10 permit ip source 113.0.0.0 0 destination 255.255.0.0 0

[Sysname-acl-adv-3000] rule 100 deny ip

[Sysname-acl-adv-3000] quit

[Sysname] ospf 100

[Sysname-ospf-100] filter-policy 3000 import

graceful-restart (OSPF view)

Syntax

graceful-restart [ ietf | nonstandard ]

undo graceful-restart

View

OSPF view

Default level

2: System level

Parameters

ietf: Enables the IETF GR capability.

nonstandard: Enables the non-IETF GR capability.

Description

Use graceful-restart to enable OSPF Graceful Restart capability.

Use undo graceful-restart to disable OSPF Graceful Restart capability.

By default, OSPF Graceful Restart capability is disabled.

Enable Opaque LSA advertisement and reception with the opaque-capability enable command before

enabling the IETF GR capability for OSPF.

Before enabling non-IETF GR capability for OSPF, enable OSPF LLS (link local signaling) with the enable

link-local-signaling command and OOB (out of band resynchronization) with the enable

out-of-band-resynchronization command.

If the keywords nonstandard and ietf are not specified when OSPF GR is enabled, nonstandard is the

default.

HP 6125G User Manual

Other manuals for HP 6125G