HP 6125G - Ipv6-Family; Network (Ipv6 Address Family View)

302
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] import-route ripng 1
ipv6-family
Syntax
ipv6-family
undo ipv6-family
View
BGP view
Default level
2: System level
Parameters
None.
Description
Use ipv6-family to enter IPv6 address family view.
Use undo ipv6-family to remove all configurations from the view.
IPv4 BGP unicast view is the default.
Examples
# Enter IPv6 address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6]
network (IPv6 address family view)
Syntax
network ipv6-address prefix-length [ route-policy route-policy-name | short-cut ]
undo network ipv6-address prefix-length [ short-cut ]
View
IPv6 address family view
Default level
2: System level
Parameters
ipv6-address: IPv6 address.
prefix-length: Prefix length of the address, in the range of 0 to 128.
route-policy-name: Name of a routing policy, a string of 1 to 63 characters.