Local
Indicates whether the local device supports sending and receiving
Route-refresh packets with ORF information. The value can be:
• both—Supports sending and receiving Route-refresh messages
with ORF information.
• Send—Supports sending Route-refresh messages with ORF
information.
• Receive—Supports receiving Route-refresh messages with ORF
information.
Peer Preferred Value Weight for the routes from the peer
No routing policy is configured Whether the VPN instance is configured with a routing policy
Peer IP address of the peer
AS AS number of the peer group
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages waiting to be sent to the peer
PrefRcv Number of prefixes received
Up/Down Duration of the BGP session in the current state
State Status of the peer
display bgp vpnv4 vpn-instance network
Syntax
display bgp vpnv4 vpn-instance vpn-instance-name network [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vpn-instance-name: Displays information about the specified VPN. vpn-instance-name is the VPN
instance name, a case-sensitive string of 1 to 31 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
To Next Page
Loading...
