364
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp vpnv4 vpn-instance group to display information about a specific BGP VPNv4 peer
group or all BGP VPNv4 peer groups.
Examples
# Display information about the BGP VPNv4 peer group a for VPN instance vpn1.
<Sysname> display bgp vpnv4 vpn-instance vpn1 group a
BGP peer-group is a
remote AS number not specified
Type : external
Maximum allowed prefix number: 150000
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
ORF advertise capability based on Prefix(type 64):
Local : both
Peer Preferred Value: 99
No routing policy is configured
Members:
Peer AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
10.1.1.1 200 18 21 0 1 00:12:58 Established
Table 82 Command output
Field Descri
BGP peer-group Name of the BGP peer group
remote AS number Number of the remote AS
Type Peer group type
Maximum allowed prefix number Maximum number of routes that the VPN instance supports
Threshold Threshold value
Configured hold timer value Setting of the hold timer
Keepalive timer value Keepalive interval
Minimum time between advertisement
runs
Minimum route advertisement interval
To Next Page
Loading...
