158
Examples
# Display BGP routing statistics.
<Sysname> display bgp routing-table statistic
Total Number of Routes: 4
display router id
Syntax
display router id [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display router id to display the global router ID.
Examples
# Display the global router ID.
<Sysname> display router id
Configured router ID is 1.1.1.1
ebgp-interface-sensitive
Syntax
ebgp-interface-sensitive
undo ebgp-interface-sensitive
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
None
To Next Page
Loading...
Need help?
General