148
Description
Use display bgp routing-table as-path-acl to display BGP routes permitted by an AS path list.
Examples
# Display BGP routes permitted by AS path list 1.
<Sysname> display bgp routing-table as-path-acl 1
BGP Local router ID is 20.20.20.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? – incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 30.30.30.1 0 0 300i
For description of the fields, see Table 36.
display bgp routing-table cidr
Syntax
display bgp routing-table cidr [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp routing-table cidr to display BGP CIDR (Classless Inter-Domain Routing) routing
information.
Examples
# Display BGP CIDR routing information.
<Sysname> display bgp routing-table cidr
Total Number of Routes: 1
BGP Local router ID is 20.20.20.1
Status codes: * - valid, ^ - VPNv4 best, > - best, d - damped,
To Next Page
Loading...
Need help?
General