335
View
Routing policy view
Default level
2: System level
Parameters
comm-list-number: Community list number. A basic community list number ranges from 1 to 99. A
advanced community list number ranges from 100 to 199.
comm-list-name: Community list name, a string of 1 to 31 characters, which can contain letters, numbers,
and signs.
Description
Use apply comm-list delete to remove the COMMUNITY attributes specified by the community list from
BGP routing information.
Use undo apply comm-list to remove the clause configuration.
No COMMUNITY attributes are removed from BGP routing information by default.
Examples
# Configure node 10 in permit mode of routing policy policy1: remove the COMMUNITY attributes
specified in community list 1 from the BGP routing information matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply comm-list 1 delete
apply community
Syntax
apply community { none | additive | { community-number&<1-16> | aa:nn&<1-16> | internet |
no-advertise | no-export | no-export-subconfed } * [ additive ] }
undo apply community
View
Routing policy view
Default level
2: System level
Parameters
none: Removes the COMMUNITY attributes of BGP routes.
community-number: Community sequence number, in the range of 1 to 4294967295.
aa:nn: Community number; both aa and nn are in the range of 0 to 65535.
&<1-16>: Indicates the argument before it can be entered up to 16 times.
internet: Sets the INTERNET community attribute for BGP routes. Routes with this attribute can be
advertised to all BGP peers.
To Next Page
Loading...
Need help?
General