HP 6125G User Manual

34
Field Description
Address/Mask IP address and mask of the interface.
Version RIP version running on the interface.
MetricIn
Additional routing metric added to the incoming
routes.
MetricIn route policy
Name of the routing policy used to add the additional
routing metric for the incoming routes. If no routing
policy is referenced, the field displays Not
designated.
MetricOut
Additional routing metric added to the outgoing
routes.
MetricOut route policy
Name of the routing policy used to add the additional
routing metric for the outgoing routes. If no routing
policy is referenced, the field displays Not
designated.
Split-horizon
Indicates whether split-horizon is enabled:
• on—Enabled.
• off—Disabled.
Poison-reverse
Indicates whether poison-reverse is enabled:
• on—Enabled.
• off—Disabled.
Input/Output
Indicates if the interface is allowed to receive (Input) or
send (Output) RIP messages:
• on—Means it is allowed.
• off—Means it is not allowed.
Default route
Indicates whether sending the default route to RIP
neighbors is allowed:
• on—Means it is allowed.
• off—Means it is not allowed.
Current packets number/Maximum packets number
Packets to be sent/Maximum packets that can be sent
on the interface.
display rip route
Syntax
display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] [ | { begin
| exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.

HP 6125G Specifications

General

Brand	HP
Model	6125G
Category	Switch
Language	English